How to change the IP Address on a 1net1 ALR-U270 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the 1net1 ALR-U270 router.

Other 1net1 ALR-U270 Guides

This is the ip address guide for the 1net1 ALR-U270. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The 1net1 ALR-U270

To get started configuring the 1net1 ALR-U270 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the 1net1 ALR-U270, follow our 1net1 ALR-U270 Login Guide.

Change the LAN IP Address on a 1net1 ALR-U270

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your 1net1 ALR-U270 router.

Once you've logged into the 1net1 ALR-U270 router you should be taken to the Dashboard. Want to change your router's IP address? Start off by clicking Settings near the top of the page. From there click LAN in the left hand sidebar.

Configure the LAN section of your 1net1 ALR-U270

router IP address lan home network
This is the lan page from your 1net1 ALR-U270 router.

This takes you to the page you see above.

On this page you're presented with the option to change your IP Address. Go ahead; enter your new address into the given box. Not sure what you should change it to? Try 10.0.0.1

Below that you'll see the Subnet Mask. Make sure not to change this. It needs to stay at 255.255.255.0

Congratulations! That's all there is to it. Just be sure to click Apply before leaving the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other 1net1 ALR-U270 Info

Don't forget about our other 1net1 ALR-U270 info that you might be interested in.

This is the ip address guide for the 1net1 ALR-U270. We also have the following guides for the same router: