This guide will show you how to reset your 1net1 R-90 router. When you reset your 1net1 R-90b router it will go back to its original factory settings. This is not rebooting your router which only means turning your router off and then back on again.
Warning: Resetting your router to factory defaults should not be taken casually. There are a few things that need to be considered:
- First, the router's username and password will be reset to the factory defaults.
- Second, the Wi-Fi username and password will also be reset to the factory defaults.
- Your ISP username and password might have to be re-entered and you may need to call your ISP for those details.
- All other configurations you may have made to your router such as firewalls and port forwards will needs to be re-entered.
Other 1net1 R-90 Guides
This is the reset router guide for the 1net1 R-90. We also have the following guides for the same router:
- 1net1 R-90 - 1net1 R-90 Screenshots
- 1net1 R-90 - How to change the IP Address on a 1net1 R-90 router
- 1net1 R-90 - 1net1 R-90 Login Instructions
- 1net1 R-90 - 1net1 R-90 Port Forwarding Instructions
- 1net1 R-90 - 1net1 R-90 User Manual
- 1net1 R-90 - Setup WiFi on the 1net1 R-90
- 1net1 R-90 - 1net1 R-90 Default Password
- 1net1 R-90 - Information About the 1net1 R-90 Router
Reset the 1net1 R-90
While the router is on, turn the router over so you are looking at the bottom.
Now take the end of a paperclip or other small object and press the small reset button on the bottom of the 1net1 R-90 for 7 to 10 seconds.
Don't forget this erases all your settings. Resetting your router should not be done until all other methods of troubleshooting are exhausted.
Login to the 1net1 R-90
After you have reset your 1net1 R-90 you can now login to it using the factory default username and password. Click this link to take you to the 1net1 R-90 login page.
Change Your Password
Once you have logged in you should change your password. Check out our Choosing a Strong Password guide for helpful tips.
Tip: Make sure to write your new password on a sticky-note and attach it to the bottom of the router.
Setup WiFi on the 1net1 R-90
Finally you're going to need to setup your WiFi. This is going to have a different password than your router password. We have instructions on How to Setup WiFi on the 1net1 R-90 that you can follow.
1net1 R-90 Help
Be sure to check out our other 1net1 R-90 info that you might be interested in.
This is the reset router guide for the 1net1 R-90. We also have the following guides for the same router:
- 1net1 R-90 - 1net1 R-90 Screenshots
- 1net1 R-90 - How to change the IP Address on a 1net1 R-90 router
- 1net1 R-90 - 1net1 R-90 Login Instructions
- 1net1 R-90 - 1net1 R-90 Port Forwarding Instructions
- 1net1 R-90 - 1net1 R-90 User Manual
- 1net1 R-90 - Setup WiFi on the 1net1 R-90
- 1net1 R-90 - 1net1 R-90 Default Password
- 1net1 R-90 - Information About the 1net1 R-90 Router