On this page we will show you how to reset your 2Wire 2071-A router to it's original factory defaults. It is important to note that this is not the same as rebooting your router which is simply turning your router off and then back on again. Resetting your router erases all your configurations you have made.
Warning: Do not reset your router unless you have tried other methods of fixing your problem. The following is a partial list of some of the things that will be changed:
- Your router username and password will be reset to the original factory settings.
- If you use an Internet password this will also be reset.
- The ISP username and password will need to be re-entered in order to use the Internet. If you are unsure of those you will need to call your ISP.
- Any other settings you have made such as port forwards or firewalls will be erased. You have to reconfigure these after the reset.
Other 2wire 2071-A Guides
This is the reset router guide for the 2wire 2071-A. We also have the following guides for the same router:
- 2wire 2071-A - How to change the IP Address on a 2wire 2071-A router
- 2wire 2071-A - 2wire 2071-A Login Instructions
- 2wire 2071-A - 2wire 2071-A User Manual
- 2wire 2071-A - 2wire 2071-A Port Forwarding Instructions
- 2wire 2071-A - 2wire 2071-A Default Password
- 2wire 2071-A - Information About the 2wire 2071-A Router
- 2wire 2071-A - 2wire 2071-A Screenshots
Reset the 2wire 2071-A
While your 2Wire 2071-A is still on, turn it over so you are looking at the back of it. It should look similar to the figure below.
Using the end of a paperclip or other small object press and hold the reset button (located here in the red box) for approximately 10 seconds.
Remember this erases everything you have previously done to this router. Only do this after you have tried other options.
Login to the 2wire 2071-A
Now that you have reset your 2Wire 2071-A router you can login using the default username and password it came with from the factory. Follow this Login Guide to help you.
Change Your Password
Once you have finished logging in to the 2Wire 2071-A it's a good idea to change your router's password. If you need tips or ideas on good passwords, check out this Choosing a Strong Password guide.
Tip: Write this new password down on a piece of paper and attach it to the bottom of your router for safe keeping.
2wire 2071-A Help
Be sure to check out our other 2wire 2071-A info that you might be interested in.
This is the reset router guide for the 2wire 2071-A. We also have the following guides for the same router:
- 2wire 2071-A - How to change the IP Address on a 2wire 2071-A router
- 2wire 2071-A - 2wire 2071-A Login Instructions
- 2wire 2071-A - 2wire 2071-A User Manual
- 2wire 2071-A - 2wire 2071-A Port Forwarding Instructions
- 2wire 2071-A - 2wire 2071-A Default Password
- 2wire 2071-A - Information About the 2wire 2071-A Router
- 2wire 2071-A - 2wire 2071-A Screenshots