Actiontec R1000H Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Actiontec R1000H router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Actiontec R1000H Guides

This is the port forwarding guide for the Actiontec R1000H. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Actiontec R1000H to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Actiontec R1000H

To get started forwarding a port you need to login to your Actiontec R1000H router. If you are already logged in you can skip this step.

To login to the Actiontec R1000H, follow our Actiontec R1000H Login Guide.

Forward a Port on the Actiontec R1000H router

Find The Port Forwarding Section of the Actiontec R1000H

router status mac address internet IP
This is the status page from your Actiontec R1000H router.

This guide begins on the Home Network Map of the Actiontec R1000H router. To forward a port, click the choice labeled Advanced Setup at the top of the page. Then on the right, under the category of Security, pick Port Forwarding.

Configure the Port Forwarding section of your Actiontec R1000H

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Actiontec R1000H router.
  • If you are forwarding a single port, enter that number in the two boxes titled Starting Port, and Ending Port.
  • If you are forwarding a range of ports, enter the lowest number in the Starting Port box, and the highest number of the range in the Ending Port box.
  • Next, choose the type of protocol you want to use in the Protocol drop down menu.
  • Next, enter the LAN IP address of the computer you are forwarding these ports to in the box labeled LAN IP Address.
  • Click the Apply button, when you are finished.

You did it!

Test if Your Ports are Open

Now that you have forwarded ports on the Actiontec R1000H you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Actiontec R1000H Info

Don't forget about our other Actiontec R1000H info that you might be interested in.

This is the port forwarding guide for the Actiontec R1000H. We also have the following guides for the same router: