This page shows how to change the LAN IP Address on the AirLive WT-2000ARM router.
Other AirLive WT-2000ARM Guides
This is the ip address guide for the AirLive WT-2000ARM. We also have the following guides for the same router:
- AirLive WT-2000ARM - AirLive WT-2000ARM Login Instructions
- AirLive WT-2000ARM - Setup WiFi on the AirLive WT-2000ARM
- AirLive WT-2000ARM - AirLive WT-2000ARM User Manual
- AirLive WT-2000ARM - AirLive WT-2000ARM Port Forwarding Instructions
- AirLive WT-2000ARM - How to change the DNS settings on a AirLive WT-2000ARM router
- AirLive WT-2000ARM - How to Reset the AirLive WT-2000ARM
- AirLive WT-2000ARM - Information About the AirLive WT-2000ARM Router
- AirLive WT-2000ARM - AirLive WT-2000ARM Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The AirLive WT-2000ARM
To get started configuring the AirLive WT-2000ARM LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the AirLive WT-2000ARM, follow our AirLive WT-2000ARM Login Guide.
Change the LAN IP Address on a AirLive WT-2000ARM
If you followed our login guide above then you should see this screen.
You will begin on the Status page of the AirLive WT-2000ARM. First, click Interface Setup, then LAN.
Configure the LAN section of your AirLive WT-2000ARM
Here you are able to change your Router IP Address, the address you see when inside your network. Enter your new address in the box labeled IP Address. We highly recommend that you leave the IP Subnet Mask at 255.255.255.0
When you are finished, click Save.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other AirLive WT-2000ARM Info
Don't forget about our other AirLive WT-2000ARM info that you might be interested in.
This is the ip address guide for the AirLive WT-2000ARM. We also have the following guides for the same router:
- AirLive WT-2000ARM - AirLive WT-2000ARM Login Instructions
- AirLive WT-2000ARM - Setup WiFi on the AirLive WT-2000ARM
- AirLive WT-2000ARM - AirLive WT-2000ARM User Manual
- AirLive WT-2000ARM - AirLive WT-2000ARM Port Forwarding Instructions
- AirLive WT-2000ARM - How to change the DNS settings on a AirLive WT-2000ARM router
- AirLive WT-2000ARM - How to Reset the AirLive WT-2000ARM
- AirLive WT-2000ARM - Information About the AirLive WT-2000ARM Router
- AirLive WT-2000ARM - AirLive WT-2000ARM Screenshots