Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Alcatel-Lucent I-240W-Q router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Alcatel-Lucent I-240W-Q router.

Other Alcatel-Lucent I-240W-Q Guides

This is the ip address guide for the Alcatel-Lucent I-240W-Q. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Alcatel-Lucent I-240W-Q

To get started configuring the Alcatel-Lucent I-240W-Q LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Alcatel-Lucent I-240W-Q, follow our Alcatel-Lucent I-240W-Q Login Guide.

Change the LAN IP Address on a Alcatel-Lucent I-240W-Q

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Alcatel-Lucent I-240W-Q router.

You should begin on the Status page of the Alcatel-Lucent I-240W-Q. From there, click Network, located on the left underneath Status, then click LAN.

Configure the LAN section of your Alcatel-Lucent I-240W-Q

router setup
This is the setup page from your Alcatel-Lucent I-240W-Q router.

In the box labeled IP Address enter your new address of your choice. We recommend 192.168.1.1 for this Router.

Please note that you need to leave the Subnet Mask at the address of 255.255.255.0 and the DHCP Enable button checked.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Alcatel-Lucent I-240W-Q Info

Don't forget about our other Alcatel-Lucent I-240W-Q info that you might be interested in.

This is the ip address guide for the Alcatel-Lucent I-240W-Q. We also have the following guides for the same router: