Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Ambit U10C022

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

Let's discuss how to reset the Ambit U10C022 router. Resetting a router is different than rebooting a router. Rebooting is cycling the power and is accomplished by turning off the device and turning it back on. Resetting a router is almost as easy but has a lot more consequences.

Warning: Resetting a router is a serious step to be taken. Resetting a router can cause unwanted problems if you don't know what changes take place during the process. Below is a partial list of some of the things that are changed in a reset.

  • The router's main password and username are reverted back to factory defaults.
  • The WiFi SSID/username and password are reset as well.
  • If you use a DSL connection to get your Internet you will need to re-enter your ISP username and password. To get this information you need to call your ISP.
  • Any changes you have made to your router such as port forwards, firewalls, or even IP address changes will need to be reconfigured after the reset process is complete.

Other Ambit U10C022 Guides

This is the reset router guide for the Ambit U10C022. We also have the following guides for the same router:

Reset the Ambit U10C022

The first step is to make sure your router is on and stays on during the reset process. Do not unplug or turn off the Ambit U10C022 router during the reset process as it could cause permanent damage.

Now take a look at the back panel of the Ambit U10C022. It should look similar to the image below.

router reset factory settings
This is the reset page from your Ambit U10C022 router.

Take the tip of a pencil or an unfolded paperclip to press and hold the reset button (circled in red) for approximately 10 seconds.

Remember this is going to erase everything you have done to your router. Make sure you have exhausted all other troubleshooting methods before attempting a reset.

Login to the Ambit U10C022

Once you have completed the reset process for the Ambit U10C022 router you need to login using the default username and password associated with this router. We have compiled these for you in our Ambit U10C022 Login Guide.

Change Your Password

Now that you have logged into the Ambit U10C022 you need to change that default password you just used. This can be just about anything you like but keep it strong. If you have difficulty creating new strong passwords take a look at our Choosing a Strong Password guide. This guide is full of helpful ideas for you.

Tip: After creating a new password you need to write it down somewhere you won't lose it. We recommend writing this new password down on a slip of paper and attaching it to the bottom of the router for the next time you need to login to your router.

Setup WiFi on the Ambit U10C022

The last setting we recommend you change as soon as possible is the WiFi security. Some router manufacturers like to leave the security open or disabled as the default setting. This needs to be changed right away. We recommend setting the security to WPA2-PSK for the strongest security available right now. If you need help doing this check out our How to Setup WiFi on the Ambit U10C022 guide.

Ambit U10C022 Help

Be sure to check out our other Ambit U10C022 info that you might be interested in.

This is the reset router guide for the Ambit U10C022. We also have the following guides for the same router: