Setup Router logo in white Setup router name logo in white
Get Software

Ambit U10C037 Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Ambit U10C037 router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Ambit U10C037 Guides

This is the port forwarding guide for the Ambit U10C037. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Ambit U10C037 to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Ambit U10C037

To get started forwarding a port you need to login to your Ambit U10C037 router. If you are already logged in you can skip this step.

To login to the Ambit U10C037, follow our Ambit U10C037 Login Guide.

Forward a Port on the Ambit U10C037 router

Find The Port Forwarding Section of the Ambit U10C037

router status mac address internet IP
This is the status page from your Ambit U10C037 router.

You begin on the Home page of the Ambit U10C037 router. To forward a port, click the link at the top of the page labeled GATEWAY.

This opens a new list in the left sidebar. Pick the option of Forwarding under the heading of Advanced Gateway Setup.

Configure the Port Forwarding section of your Ambit U10C037

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Ambit U10C037 router.

You are now on the correct page to forward a port. Starting on the left, in the Local IP box, enter the LAN IP Address of the computer you are forwarding these ports to.

Next, if you are forwarding one port, you need to enter that number in the Internal Port box, the Ext Start Port box, and the Ext End Port box.

If you are forwarding a range of ports, enter the lowest number in the range in the Internal Port box, and the Ext Start Port box. Enter the highest number of the range in the Ext End Port box.

Then, use the Protocol drop down menu to choose the type of protocol you want to use when forwarding this port or ports.

Tick the box titled Enable.

That's all there is to it, simply click the Apply button at the bottom of the page before exiting.

Test if Your Ports are Open

Now that you have forwarded ports on the Ambit U10C037 you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Ambit U10C037 Info

Don't forget about our other Ambit U10C037 info that you might be interested in.

This is the port forwarding guide for the Ambit U10C037. We also have the following guides for the same router: