In this guide I will cover how to reset the Arcadyan VGV7518 router to factory defaults. This is not the same thing as rebooting a router. A reboot is cycling the power by turning it off and back on again to cycle the power. A reset isn't that hard to do but has more consequences.
Warning: Resetting a router can cause problems if you don't know what to expect. We strongly recommend considering the following before you continue.
- Your router username and password are reset.
- The SSID/username and password are reset.
- If you use a DSL connection it will need to be re-entered in order to keep using your Internet. You can get this information from the ISP or Internet Service Provider.
- All configurations you have made need to be re-entered. This could include anything from port forwards to IP address changes.
Other Arcadyan VGV7518 Guides
This is the reset router guide for the Arcadyan VGV7518. We also have the following guides for the same router:
Reset the Arcadyan VGV7518
The first thing you want to do on any reset is to keep the router on. Do not unplug or turn off the router during the reset process. This could cause permanent damage to the router.
Now you need to find the reset button. It is very tiny and normally can be found on the back panel. Look at the image below for reference.
Using the tip of a sharp pencil or pin press and hold the reset button for approximately 10 seconds.
Don't forget that this will erase all of your settings. This should be tried only after you have exhausted other troubleshooting methods.
Login to the Arcadyan VGV7518
Now that you have finished the reset process you need to login using the factory defaults. We have found these for you and included them in the Arcadyan VGV7518 Login Guide.
Change Your Password
The next thing to do is change that password to something new. It can be difficult to come up with new passwords. We have created a guide containing a list of helpful hints in creating a strong password. Please take a look at our Choosing a Strong Password.
Tip: Write this new password down on a piece of paper and attach it to the bottom of the router for future reference.
Setup WiFi on the Arcadyan VGV7518
The last setting we recommend setting is the WiFi security. Don't forget that everything is reset including the security. Some router manufacturers like to leave the security open as the default. This means your network is not secure, anyone can use it. Change this to WPA2-PSK. If you need help with this check out our How to Setup WiFi on the Arcadyan VGV7518 guide.
Arcadyan VGV7518 Help
Be sure to check out our other Arcadyan VGV7518 info that you might be interested in.
This is the reset router guide for the Arcadyan VGV7518. We also have the following guides for the same router: