This page shows how to change the LAN IP Address on the Arris TG1682G router.
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
To get started configuring the Arris TG1682G LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Arris TG1682G, follow our Arris TG1682G Login Guide.
If you followed our login guide above then you should see this screen.
This guide begins on the Home page of the Arris TG1682G router. To change your router's IP address click Connection on the left hand side of the page. From there go to Local IP Network.
This brings you to the page you see above.
Here you can change your router's IP address. Enter your desired IP address into the boxes labeled Gateway Address. If you're having trouble thinking of a good one try 192.168.0.1
Just below that is the option to change your Subnet Mask, but it would be wise to leave it alone. It needs to stay at 255.255.255.0
Congratulations! You're finished. Just be sure to save your settings before leaving.
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Don't forget about our other Arris TG1682G info that you might be interested in.