This page shows how to change the LAN IP Address on the Dlink DWR-113 router.
Other Dlink DWR-113 Guides
This is the ip address guide for the Dlink DWR-113. We also have the following guides for the same router:
- Dlink DWR-113 - Dlink DWR-113 Login Instructions
- Dlink DWR-113 - Dlink DWR-113 User Manual
- Dlink DWR-113 - How to change the DNS settings on a Dlink DWR-113 router
- Dlink DWR-113 - Setup WiFi on the Dlink DWR-113
- Dlink DWR-113 - How to Reset the Dlink DWR-113
- Dlink DWR-113 - Dlink DWR-113 Screenshots
- Dlink DWR-113 - Information About the Dlink DWR-113 Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Dlink DWR-113
To get started configuring the Dlink DWR-113 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Dlink DWR-113, follow our Dlink DWR-113 Login Guide.
Change the LAN IP Address on a Dlink DWR-113
If you followed our login guide above then you should see this screen.
After logging into the Dlink DWR-113 you are taken to the Status page. When you need to change your IP Address, the address you are looking at while inside your network, click the choice on the left side of the screen in dark blue labeled Network Settings.
Configure the LAN section of your Dlink DWR-113
On this new page, enter the new IP address you have chosen for your router in the box labeled Router IP Address. One good choice for an address is 10.0.0.1
Everything else on this page should be left as it is. The only thing left for you to do is click the Save Settings button.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Dlink DWR-113 Info
Don't forget about our other Dlink DWR-113 info that you might be interested in.
This is the ip address guide for the Dlink DWR-113. We also have the following guides for the same router:
- Dlink DWR-113 - Dlink DWR-113 Login Instructions
- Dlink DWR-113 - Dlink DWR-113 User Manual
- Dlink DWR-113 - How to change the DNS settings on a Dlink DWR-113 router
- Dlink DWR-113 - Setup WiFi on the Dlink DWR-113
- Dlink DWR-113 - How to Reset the Dlink DWR-113
- Dlink DWR-113 - Dlink DWR-113 Screenshots
- Dlink DWR-113 - Information About the Dlink DWR-113 Router