Dynalink Passwords

Here is a list of all the username and password combinations that we are aware of for Dynalink routers.

These are the factory default passwords for Dynalink routers. If you have changed the password in your router, then you need to use the new password that you have set.

This list does not include Dynalink WiFi passwords and will not help you connect to your WiFi network.

How To Login to a Dynalink Router

Dynalink routers have many settings that can be adjusted depending on your needs, such as WiFi network name, password, parental controls, and traffic prioritization. To access these settings, you need to login to your router's built-in firmware.

To access your router's settings, you can use a standard web browser such as Chrome, Firefox, or Edge. It does not matter which web browser you use.

In general, the steps to log in to a Dynalink router are the same no matter which model of router you have. Here's what you do:

• Find your router's internal IP address.
• Put that IP address in your web browser address bar.
• Login with your router's username and password.

We cover all of these steps below, including how to find your router's IP address and a list of all known default Dynalink passwords.

Find Your Dynalink Router's IP Address

To login to your router, you need to know it's IP address. All Dynalink routers have 2 IP addresses, but we are only interested in your router's internal IP address.

• Internal IP address - used for local configuration from inside your network.
• External IP address - used by your friends and coworkers to connect to you from the internet side of things.

Since we are configuring your router from inside your network, we need to know the internal IP address. From here on, for simplicity, we will refer to your router's internal IP address as it's IP address. Just remember that whenever we say IP address, we mean internal IP address.

You can find your router's IP address any of the following ways:

• Try all known Dynalink IP addresses.
• Follow our guide called Find Your Router's Internal IP Address.
• Download and install our free Router Detector software.

The simplest way to find your Dynalink IP address is to try all known default IP addresses. Here are all the known default Dynalink IP addresses.

Start with the first IP address in the list and try to login to your router with it. To login to your router, follow the steps outlined below.

If the IP address you picked does not work, then try a different one. It is harmless to try all the listed IP addresses since the only thing that we are doing here is trying to access the firmware settings of your router.

How To Login To a Dynalink Router

Once you have an IP address that you want to try, it's time to use your web browser to log in. Find the address bar in your web browser. It looks something like this:

Type your router's IP address into the address bar and press the Enter key on your keyboard. You should see either your router's home screen or a screen asking for your username and password.

If you do not see anything or you get an error that says This site can't be reached then the IP address that you are trying is wrong. Go back to the list of IP addresses above and try a different one.

If you try all the IP addresses above and still cannot log in, then you can follow our How to Find Your Router's IP Address guide.

Dynalink Default Username and Password

You need to know your Dynalink username and password to login to your router. If you are not sure what your router's username and password are, then your router may still be set to the factory defaults. If your password does not work, you can try all the default Dynalink passwords and see if any of them work. Keep trying them all until you get logged in.

Some routers lock you out after trying too many incorrect passwords. If this happens, then just let it timeout for a minute and try again.

Forgot Dynalink Password

If you have changed your Dynalink password and forgot it, then you have the following choices:

• Try to recover your router's password with Network Utilities Find Password.
• Follow our Dynalink Router Reset guide.

Resetting your router can be a very time-consuming process and may require contacting your ISP to get connected to the internet again. Please do not reset your router until you have tried every other way of getting logged in.