Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Hitron Technologies CGN2-ROG router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Hitron Technologies CGN2-ROG router.

Other Hitron Technologies CGN2-ROG Guides

This is the ip address guide for the Hitron Technologies CGN2-ROG v3. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Hitron Technologies CGN2-ROG

To get started configuring the Hitron Technologies CGN2-ROG LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Hitron Technologies CGN2-ROG, follow our Hitron Technologies CGN2-ROG Login Guide.

Change the LAN IP Address on a Hitron Technologies CGN2-ROG

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Hitron Technologies CGN2-ROG router.

Once you have finished logging into the Hitron-Technologies CGN2-ROG you start on the Device Information page. To change your IP Address, the address you see while inside your local network, click the choice labeled WAN/LAN. Then at the top of the page choose the IP tab.

Configure the LAN section of your Hitron Technologies CGN2-ROG

router setup
This is the setup page from your Hitron Technologies CGN2-ROG router.

You are now on the IP page. Find the heading of Private LAN IP Setting and enter your new IP Address in the box labeled Private LAN IP Address. One good choice is the address of 192.168.1.1

You don't need to change anything else, simply scroll to the bottom of the page and save your changes before exiting.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Hitron Technologies CGN2-ROG Info

Don't forget about our other Hitron Technologies CGN2-ROG info that you might be interested in.

This is the ip address guide for the Hitron Technologies CGN2-ROG v3. We also have the following guides for the same router: