This page shows how to change the LAN IP Address on the Inexq ISO50t router.
Other Inexq ISO50t Guides
This is the ip address guide for the Inexq ISO50t. We also have the following guides for the same router:
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Inexq ISO50t
To get started configuring the Inexq ISO50t LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Inexq ISO50t, follow our Inexq ISO50t Login Guide.
Change the LAN IP Address on a Inexq ISO50t
If you followed our login guide above then you should see this screen.
To change your Router IP Address, the address you see when inside your network, log into the Inexq ISO50t. This places you on the Main Menu page. Next, click the choice labeled Advanced Setup. This opens a new page, where you need to click the choice, in the red bar, on the left labeled LAN.
Configure the LAN section of your Inexq ISO50t
You now are on the LAN Settings page. Click the box marked IP Address and enter the new address you have chosen for your Router. This screenshot shows the address of 192.168.62.1, we would recommend a better address such as 192.168.1.1
Don't change the Subnet Mask, this should remain at 255.255.255.0
Click Apply, down at the bottom of the page, when you are finished.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Inexq ISO50t Info
Don't forget about our other Inexq ISO50t info that you might be interested in.
This is the ip address guide for the Inexq ISO50t. We also have the following guides for the same router: