How to change the IP Address on a Netgear WNR834B router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the LAN IP Address on the Netgear WNR834B router.

Other Netgear WNR834B Guides

This is the ip address guide for the Netgear WNR834B. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netgear WNR834B

To get started configuring the Netgear WNR834B LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netgear WNR834B, follow our Netgear WNR834B Login Guide.

Change the LAN IP Address on a Netgear WNR834B

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Netgear WNR834B router.

Now that you have logged into the Netgear WNR834B you start on the Basic Settings page. To change your IP Address, the address you are going to see from inside your network, click the choice in the left side bar labeled LAN IP Setup.

Configure the LAN section of your Netgear WNR834B

router setup
This is the setup page from your Netgear WNR834B router.

On this new page, place your cursor in the first of the four boxes in a row labeled IP Address. This is where you need to enter your new address you have chosen for your Router. We recommend using the address of 192.168.1.1 just like in this screenshot.

When you make this change to your Router, be sure to leave the IP Subnet Mask at 255.255.255.0

Then, save your changes, by clicking Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netgear WNR834B Info

Don't forget about our other Netgear WNR834B info that you might be interested in.

This is the ip address guide for the Netgear WNR834B. We also have the following guides for the same router: