How to change the DNS settings on a Pace Plc 4111N-031 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the DNS settings on the Pace Plc 4111N-031 router.

Other Pace Plc 4111N-031 Guides

This is the dns guide for the Pace Plc 4111N-031. We also have the following guides for the same router:

What is the DNS setting on a Router

When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:

  • 173.194.33.73

This mapping happens automatically every time you visit any page on the Internet.

Why Change Your Router's DNS Setting

Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.

By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.

What Should I Change My DNS To

There are 2 really great DNS servers on the Internet that you can choose from right now: Google Public DNS and OpenDNS. If you are not sure which one to pick then just use Google Public DNS.

When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:

If you want to use Google Public DNS, use the following settings:

  • Primary: 8.8.8.8
  • Secondary: 8.8.4.4

If you want to use OpenDNS, use the following settings:

  • 208.67.222.222
  • 208.67.220.220

Login To The Pace Plc 4111N-031

To get started configuring the Pace Plc 4111N-031 DNS page you need to login to your router. If you are already logged in you can skip this step.

To login to the Pace Plc 4111N-031, follow our Pace Plc 4111N-031 Login Guide.

Change the DNS settings on a Pace Plc 4111N-031

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Pace Plc 4111N-031 router.

You should begin on the Status page of the Pace-Plc 4111N-031 router. First you need to click the choice titled Settings. This brings up a new set of choices, pick the one labeled Broadband, then under that, Link Configuration.

Configure the DNS section of your Pace Plc 4111N-031

subManu subModel router
This is the general page from your Pace Plc 4111N-031 router.

You are then taken to a page where you can modify certain settings including the DNS Server.

Look down this page until you see the heading of Broadband IP Network (Primary Connection). In this section, tick the radio button labeled Manually specify DNS information.

Beneath that is a space labeled Primary Server. Enter the main address of the DNS Server you want to use. This address is always used first.

Next is the Secondary Server. Use this space to enter the secondary address of the DNS Server. This address acts as a back-up, only being used if the first can't be found.

You can leave the Domain Name blank.

That's all there is to it, simply click the Save button at the bottom of the page before exiting.

Possible Problems when Changing your DNS settings

Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.

Other Pace Plc 4111N-031 Info

Don't forget about our other Pace Plc 4111N-031 info that you might be interested in.

This is the dns guide for the Pace Plc 4111N-031. We also have the following guides for the same router: