How to change the DNS settings on a Netgear FVS318v2 router

This page shows how to change the DNS settings on the Netgear FVS318v2 router.

Other Netgear FVS318v2 Guides

What is the DNS setting on a Router

When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:

This mapping happens automatically every time you visit any page on the Internet.

Why Change Your Router's DNS Setting

Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.

By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.

What Should I Change My DNS To

There are 2 really great DNS servers on the Internet that you can choose from right now: Google Public DNS and OpenDNS. If you are not sure which one to pick then just use Google Public DNS.

When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:

If you want to use Google Public DNS, use the following settings:

If you want to use OpenDNS, use the following settings:

Login To The Netgear FVS318v2

To get started configuring the Netgear FVS318v2 DNS page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netgear FVS318v2, follow our Netgear FVS318v2 Login Guide.

Change the DNS settings on a Netgear FVS318v2

If you followed our login guide above then you should see this screen.

This guide begins on the Router Status page of the Netgear FVS318v2. To change the DNS Server settings, click the file on the left hand side of the page labeled Basic Settings.

Configure the DNS section of your Netgear FVS318v2

You are now on the correct page. First, find the heading of Domain Name Server (DNS) Address, and tick the radio button labeled Use These DNS servers.

You now need to enter a new set of DNS server addresses. In the first set of boxes titled Primary DNS, enter the main address of the DNS Server you have chosen. The address you enter here is always used first.

The next set of boxes is titled Secondary DNS. Enter the address of the DNS Server you want to be secondary. The DNS server address you enter here is the back-up address, and is only accessed when the first cannot be found.

Click the Apply button before exiting. That's all there is to it!

Possible Problems when Changing your DNS settings

Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.

Other Netgear FVS318v2 Info

Don't forget about our other Netgear FVS318v2 info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.