Sitecom WL-127 Port Forwarding Instructions

This page will show you how to setup a port forward on the Sitecom WL-127 router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Sitecom WL-127 Guides

Configure your Computer to Have a Static IP Address

Port forwarding the Sitecom WL-127 to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Sitecom WL-127

To get started forwarding a port you need to login to your Sitecom WL-127 router. If you are already logged in you can skip this step.

To login to the Sitecom WL-127, follow our Sitecom WL-127 Login Guide.

Forward a Port on the Sitecom WL-127 router

Find The Port Forwarding Section of the Sitecom WL-127

ReplaceRouterHomeScreen ReplacePortForwardingNav

Configure the Port Forwarding section of your Sitecom WL-127

Now to forward a port, make the following changes:

ReplaceRouterPortforwardingScreen ReplacePortForwardingInstructions

Test if Your Ports are Open

Now that you have forwarded ports on the Sitecom WL-127 you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Sitecom WL-127 Info

Don't forget about our other Sitecom WL-127 info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.