This page shows how to change the LAN IP Address on the Actiontec GT724WG router.
Other Actiontec GT724WG Guides
This is the ip address guide for the Actiontec GT724WG. We also have the following guides for the same router:
- Actiontec GT724WG - Actiontec GT724WG Login Instructions
- Actiontec GT724WG - Actiontec GT724WG User Manual
- Actiontec GT724WG - Actiontec GT724WG Port Forwarding Instructions
- Actiontec GT724WG - How to change the DNS settings on a Actiontec GT724WG router
- Actiontec GT724WG - Setup WiFi on the Actiontec GT724WG
- Actiontec GT724WG - How to Reset the Actiontec GT724WG
- Actiontec GT724WG - Actiontec GT724WG Default Password
- Actiontec GT724WG - Information About the Actiontec GT724WG Router
- Actiontec GT724WG - Actiontec GT724WG Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Actiontec GT724WG
To get started configuring the Actiontec GT724WG LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Actiontec GT724WG, follow our Actiontec GT724WG Login Guide.
Change the LAN IP Address on a Actiontec GT724WG
If you followed our login guide above then you should see this screen.
Now that you have logged into the Actiontec GT724WG you begin on the Home page. Click Advanced Setup then LAN IP Address. When you see a warning on this page, click Yes to continue.
Configure the LAN section of your Actiontec GT724WG
On this new page, place your cursor in the box labeled Modem IP Address and type in your new address you have chosen for your Router. The other option on this page is the Modem Subnet Mask, we recommend that you leave this at 255.255.255.0
When you are done, click Apply.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Actiontec GT724WG Info
Don't forget about our other Actiontec GT724WG info that you might be interested in.
This is the ip address guide for the Actiontec GT724WG. We also have the following guides for the same router:
- Actiontec GT724WG - Actiontec GT724WG Login Instructions
- Actiontec GT724WG - Actiontec GT724WG User Manual
- Actiontec GT724WG - Actiontec GT724WG Port Forwarding Instructions
- Actiontec GT724WG - How to change the DNS settings on a Actiontec GT724WG router
- Actiontec GT724WG - Setup WiFi on the Actiontec GT724WG
- Actiontec GT724WG - How to Reset the Actiontec GT724WG
- Actiontec GT724WG - Actiontec GT724WG Default Password
- Actiontec GT724WG - Information About the Actiontec GT724WG Router
- Actiontec GT724WG - Actiontec GT724WG Screenshots