How to change the IP Address on a ZTE ZXHN H108L router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the ZTE ZXHN H108L router.

Other ZTE ZXHN H108L Guides

This is the ip address guide for the ZTE ZXHN H108L. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The ZTE ZXHN H108L

To get started configuring the ZTE ZXHN H108L LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the ZTE ZXHN H108L, follow our ZTE ZXHN H108L Login Guide.

Change the LAN IP Address on a ZTE ZXHN H108L

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your ZTE ZXHN H108L router.

We begin this guide on the Status page of the ZTE ZXHN H108L router. To change your IP address click Interface Setup near the top of the page and then LAN just below that.

Configure the LAN section of your ZTE ZXHN H108L

router IP address lan home network
This is the lan page from your ZTE ZXHN H108L router.

This should take you to the page you see here.

You can now change your router's Main IP Address. Enter your desired address into the given box. Don't quite know what you should change it to? One good option to try is 10.0.0.1

Below that you'll see the Main Subnet Mask. Be sure not to change this. It needs to stay at 255.255.255.0

That's it! That's all there is to it. Just be sure to save your changes before leaving the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other ZTE ZXHN H108L Info

Don't forget about our other ZTE ZXHN H108L info that you might be interested in.

This is the ip address guide for the ZTE ZXHN H108L. We also have the following guides for the same router: