Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Actiontec GT784WN TDS router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Actiontec GT784WN TDS router.

Other Actiontec GT784WN TDS Guides

This is the ip address guide for the Actiontec GT784WN TDS. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Actiontec GT784WN TDS

To get started configuring the Actiontec GT784WN TDS LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Actiontec GT784WN TDS, follow our Actiontec GT784WN TDS Login Guide.

Change the LAN IP Address on a Actiontec GT784WN TDS

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Actiontec GT784WN TDS router.

Once on the Homepage of the Actiontec GT784WN - TDS click the tab labeled Advanced Setup, located at the top in green.

Next choices appear on the left of the screen. Under IP Addressing click LAN IP Settings.

Configure the LAN section of your Actiontec GT784WN TDS

router setup
This is the setup page from your Actiontec GT784WN TDS router.

Now you need to enter the new IP Address. In the box labeled Modem IP Address type the address of your choice. We strongly recommend 192.168.0.1 and make sure the Modem Subnet Mask is 255.255.255.0

Make sure your DHCP Server is enabled. Click Apply and Reboot in green to finish.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Actiontec GT784WN TDS Info

Don't forget about our other Actiontec GT784WN TDS info that you might be interested in.

This is the ip address guide for the Actiontec GT784WN TDS. We also have the following guides for the same router: