How to change the IP Address on a Pace-Plc 4111N-031 router

This page shows how to change the LAN IP Address on the Pace-Plc 4111N-031 router.

Other Pace-Plc 4111N-031 Guides

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Pace-Plc 4111N-031

To get started configuring the Pace-Plc 4111N-031 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Pace-Plc 4111N-031, follow our Pace-Plc 4111N-031 Login Guide.

Change the LAN IP Address on a Pace-Plc 4111N-031

If you followed our login guide above then you should see this screen.

After you have logged into the Pace-Plc 4111N-031 you are placed on the Home page of your Router. To change your LAN IP Address, or the address you see while inside your network, click the choice at the top of the page labeled Settings. Then below that, LAN and DHCP.

Configure the LAN section of your Pace-Plc 4111N-031

You are now on a page like the one shown here. Under the heading of DHCP Network Range, choose one of the bullets. If you decide to choose Configure manually, enter the new address in the box labeled Router Address. Make this IP Address simple to remember, such as 192.168.0.1

When you have finished, make sure to save and you are done.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Pace-Plc 4111N-031 Info

Don't forget about our other Pace-Plc 4111N-031 info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.