Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear B90-755044-15

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Netgear B90-755044-15 router. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's username and password are reset.
  • Your WiFi name and password are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Netgear B90-755044-15 Guides

This is the reset router guide for the Netgear B90-755044-15 06.05.21A Frontier. We also have the following guides for the same router:

Recover Password in Netgear B90-755044-15

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Netgear B90-755044-15

You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not worry about holding the button down too long; this is harmless.

Just don't forget that this will totally reset your Netgear B90-755044-15 router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Netgear B90-755044-15

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our B90-755044-15 Login Guide has all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Netgear B90-755044-15 Guides

If you want additional help with your Netgear B90-755044-15 be sure to check out some of our other guides.

This is the reset router guide for the Netgear B90-755044-15 06.05.21A Frontier. We also have the following guides for the same router: