Setup Router logo in white Setup router name logo in white
Get Software

Reset the Trendnet TW100-BRV304v3

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Trendnet TW100-BRV304v3 router to factory default settings. This is a much bigger deal than a router reboot. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's login and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Trendnet TW100-BRV304v3 Guides

This is the reset router guide for the Trendnet TW100-BRV304v3. We also have the following guides for the same router:

Recover Password in Trendnet TW100-BRV304v3

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Trendnet TW100-BRV304v3

There is usually a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will erase everything you have previously done to this Trendnet TW100-BRV304v3 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Trendnet TW100-BRV304v3

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our TW100-BRV304v3 Login Guide to find all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Trendnet TW100-BRV304v3 Guides

If you want additional help with your Trendnet TW100-BRV304v3 be sure to check out some of our other guides.

This is the reset router guide for the Trendnet TW100-BRV304v3. We also have the following guides for the same router: