How to Reset the ADB DV2200

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I explain how to properly reset the ADB DV2200 router back to factory defaults. This is not the same thing as a reboot. When you reboot a router you cycle the power to the unit. When you reset a router you are taking all the settings you have changed in the past and reverting every one of them back to factory defaults.

Warning: During this reset all your personal data is lost. I strongly recommend making a list of all the possible settings you have changed in the past. These settings include:

  • The router's main username and password.
  • The WiFi settings such as the SSID and the Internet password.
  • Are you resetting a DSL router? You need to re-enter the Internet Service Provider (ISP) username and password. Call your ISP for these details.
  • What else have you done to the ADB DV2200 router? Have you created any port forwards or IP address changes?

Other ADB DV2200 Guides

This is the reset router guide for the ADB DV2200. We also have the following guides for the same router:

Reset the ADB DV2200

On the back panel of the ADB DV2200 router you should see a reset button/pinhole. This tiny little button has most likely been recessed to avoid accidental resets.

router reset factory settings
This is the reset page from your ADB DV2200 router.

While the router is plugged in and on take a straightened paperclip or ball point pen to press and hold the reset button down for approximately 10 seconds. This starts the reset process which can take upwards of several minutes to complete. If you don't hold the reset button down for the full amount of time needed you may end up only rebooting the router instead of resetting it like you planned.

Warning: DO NOT unplug or turn off the router during the reset process. Doing so can cause permanent damage to the device.

Remember a reset like this one erases every single setting you have ever changed in the history of the router. I strongly recommend trying other methods of troubleshooting before you reset the ADB DV2200 router.

Login to the ADB DV2200

After the ADB DV2200 router has finished resetting you will need to login to it. You can do this by using the default IP address, password, and username. Check out all of the information you need to login to your router in our ADB DV2200 Login Guide.

Tip: Defaults not working? Try resetting the router again, but this time hold down the reset button for a little longer.

Change Your Password

The password for your router should be changed from the default as soon as possible. Doing so will help increase the security of your router. Try to make your new password 14-20 characters long and have it contain no personal information. Visit our Choosing a Strong Password guide if you need additional help with making a password.

Tip: Avoid losing your password by writing it on a piece of paper for future reference and then attaching it to the bottom of the router.

Setup WiFi on the ADB DV2200

As you begin to reconfigure the router's settings don't forget to also configure the WiFi settings. Follow our ADB DV2200 WiFi Instructions to get started on securing your wireless network.

ADB DV2200 Help

Be sure to check out our other ADB DV2200 info that you might be interested in.

This is the reset router guide for the ADB DV2200. We also have the following guides for the same router: