On this page I will be showing you how to reset the ADB PRG AV4202N router. It's important that before we begin you know the difference between a reset and a reboot. When you reboot a router it cycles the power to the device. This can be done manually by unplugging the power source, waiting about 30 seconds, then plugging it back in. When you reset a router you rake all the settings and return every one of them back to factory defaults. This means every one of your personal configurations is erased.
Warning: This reset can cause a lot of changes in your router configuration. We strongly recommend that you made a list of any changes you have ever made to your router. Consider the following:
- The Internet name and password are erased and put back to how they were from the factory.
- The router's main username and password are erased as well and need to be reconfigured.
- If you use a DSL connection for your Internet you need to re-enter the ISP or Internet Service Provider username and password. We suggest calling your ISP for the details.
- Any other changes such as port forwards or IP address assignments are erased. Make sure to take note of these so you can re-enter them after the reset process is complete.
Other ADB PRG AV4202N Guides
This is the reset router guide for the ADB PRG AV4202N. We also have the following guides for the same router:
Reset the ADB PRG AV4202N
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
The first step in a reset is to know where the reset button is located. In the case of the ADB PRG AV4202N router you can find it on the back panel. Take a look at the image below.
Taking an unwound paperclip or pin press and hold the reset button down for about 10 seconds. If you don't hold this button down for long enough you end up simply rebooting the router instead of resetting it like you wanted.
Warning: Don't forget that this will erase every single setting you have ever changed on this device. If you want to avoid this loss you should try other troubleshooting methods first.
Login to the ADB PRG AV4202N
After the reset is complete you can login to the ADB PRG AV4202N router using the default information. We have this information for you. It is included in the Login Guide.
Tip: If these defaults didn't work it may be that you didn't have the reset button pressed for long enough.
Change Your Password
The next step is to change the default password. This password is protects your router's interface. To help you create a strong and memorable password check out our guide titled Choosing a Strong Password.
Tip: One way to avoid losing your new password is to write it down on a piece of paper and stick it to the underside of the router.
Setup WiFi on the ADB PRG AV4202N
Now is a great time to check on the wireless settings. These include the SSID/network name, Internet password, and security method. For the strongest security available we recommend setting it to WPA2 along with a good strong Internet password. For more details on this topic check out our guide titled How to Setup WiFi on the ADB PRG AV4202N.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
ADB PRG AV4202N Help
Be sure to check out our other ADB PRG AV4202N info that you might be interested in.
This is the reset router guide for the ADB PRG AV4202N. We also have the following guides for the same router: