Setup Router logo in white Setup router name logo in white
Get Software

Airlink 101 AR670W Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Airlink 101 AR670W router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Airlink 101 AR670W Guides

This is the port forwarding guide for the Airlink 101 AR670W. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Airlink 101 AR670W to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Airlink 101 AR670W

To get started forwarding a port you need to login to your Airlink 101 AR670W router. If you are already logged in you can skip this step.

To login to the Airlink 101 AR670W, follow our Airlink 101 AR670W Login Guide.

Forward a Port on the Airlink 101 AR670W router

Find The Port Forwarding Section of the Airlink 101 AR670W

router status mac address internet IP
This is the status page from your Airlink 101 AR670W router.

Now that you have logged into the Airlink-101 AR670W you begin on the Status page. Click the choice at the top labeled Application & Gaming. A new menu in the small orange bar shows up, click the choice labeled Port Range Forwarding.

Configure the Port Forwarding section of your Airlink 101 AR670W

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Airlink 101 AR670W router.

Now on a page like the one above, in the box marked Application Name enter something that will remind you of why you are forwarding these ports.

If you are forwarding a single port, enter that port number in both the Start and End Port boxes. If you are forwarding more than one, enter the lowest number in the range in the Start box and the highest number in the range in the End Port box.

Next is the Protocol drop down menu, choose the type of protocol you want to use for these ports.

After this is the To IP Address. Enter the IP Address you want to forward these ports to in this box. If you are forwarding ports to run a program on your computer, then use that computer's IP Address in this box.

Now, put a check in the Enabled box.

For all this to take effect, make sure to click the Apply button, then you are finished.

Test if Your Ports are Open

Now that you have forwarded ports on the Airlink 101 AR670W you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Airlink 101 AR670W Info

Don't forget about our other Airlink 101 AR670W info that you might be interested in.

This is the port forwarding guide for the Airlink 101 AR670W. We also have the following guides for the same router: