This is the reset guide for the Alfa Network 4G CampPro 2 router. This is not the same thing as rebooting a router. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's username and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Alfa Network 4G CampPro 2 Guides
This is the reset router guide for the Alfa Network 4G CampPro 2 v1.1 GB. We also have the following guides for the same router:
Recover Password in Alfa Network 4G CampPro 2
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Alfa Network 4G CampPro 2
Most of the time you can find a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Alfa Network 4G CampPro 2 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Alfa Network 4G CampPro 2
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the 4G CampPro 2 Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Alfa Network 4G CampPro 2 Guides
We have collected a lot of information about the Alfa Network 4G CampPro 2 router. You can find some of our additional content here.
This is the reset router guide for the Alfa Network 4G CampPro 2 v1.1 GB. We also have the following guides for the same router: