If you need to reset your Altice Labs GR120DG router back to factory settings, then this article shows you how. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. However, when you reset a router you, return it back to its factory default settings.
Warning: This is not a step to be taken lightly. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Altice Labs GR120DG Guides
This is the reset router guide for the Altice Labs GR120DG 3GN8020600R15 SFR. We also have the following guides for the same router:
Recover Password in Altice Labs GR120DG
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Altice Labs GR120DG
Most routers have a small button on either the back or the bottom. Look at your router and try to find something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will totally reset your Altice Labs GR120DG router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Altice Labs GR120DG
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our GR120DG Login Guide has all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Altice Labs GR120DG Guides
This isn't our only Altice Labs GR120DG guide. We also have the following guides for this router.
This is the reset router guide for the Altice Labs GR120DG 3GN8020600R15 SFR. We also have the following guides for the same router: