This guide shows you how to reset your Altice Labs GR241AG router. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.
- The router's username and password are reset.
- All WiFi settings are reset, including network name and password.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Altice Labs GR241AG Guides
This is the reset router guide for the Altice Labs GR241AG 3RGW040C00r012 (PT) MEO. We also have the following guides for the same router:
Recover Password in Altice Labs GR241AG
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Altice Labs GR241AG
You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Just don't forget that this will totally reset your Altice Labs GR241AG router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Altice Labs GR241AG
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our GR241AG Login Guide has all of the information that you need.
Change Your Password
You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Altice Labs GR241AG Guides
If you want additional help with your Altice Labs GR241AG be sure to check out some of our other guides.
This is the reset router guide for the Altice Labs GR241AG 3RGW040C00r012 (PT) MEO. We also have the following guides for the same router: