Setup Router logo in white Setup router name logo in white
Get Software

Reset the Arris NVG468MQ

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the Arris NVG468MQ router. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's login and password are reset.
  • All WiFi settings are reset, including network name and password.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Arris NVG468MQ Guides

This is the reset router guide for the Arris NVG468MQ 9.3.0h3d36 Frontier. We also have the following guides for the same router:

Recover Password in Arris NVG468MQ

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Arris NVG468MQ

Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will erase everything you have previously done to this Arris NVG468MQ router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Arris NVG468MQ

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our NVG468MQ Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Arris NVG468MQ Guides

Here are some of our other Arris NVG468MQ guides that you might be interested in.

This is the reset router guide for the Arris NVG468MQ 9.3.0h3d36 Frontier. We also have the following guides for the same router: