This article covers how to reset the Arris NVG578LX router back to factory default settings. A router reset is a much bigger deal than a router reboot. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's username and password are reset.
- Your WiFi login, password, and network name are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Arris NVG578LX Guides
This is the reset router guide for the Arris NVG578LX 9.5.0h4d131_YouFibre YouFibre. We also have the following guides for the same router:
Recover Password in Arris NVG578LX
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Arris NVG578LX
Most of the time you can find a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Keep in mind that this will completely reset your Arris NVG578LX router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Arris NVG578LX
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a NVG578LX Login Guide with all this information ready for you.
Change Your Password
You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Arris NVG578LX Guides
We have collected a lot of information about the Arris NVG578LX router. You can find some of our additional content here.
This is the reset router guide for the Arris NVG578LX 9.5.0h4d131_YouFibre YouFibre. We also have the following guides for the same router: