This guide shows you how to reset your Arris SBG6400 router to factory default settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Arris SBG6400 Guides
This is the reset router guide for the Arris SBG6400 D30GW-HARRIER-1.5.1.3-GA-00-NOSH. We also have the following guides for the same router:
Recover Password in Arris SBG6400
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Arris SBG6400
Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.
Keep in mind that this will completely reset your Arris SBG6400 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Arris SBG6400
After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our SBG6400 Login Guide to find all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Arris SBG6400 Guides
We have collected a lot of information about the Arris SBG6400 router. You can find some of our additional content here.
This is the reset router guide for the Arris SBG6400 D30GW-HARRIER-1.5.1.3-GA-00-NOSH. We also have the following guides for the same router: