If you need to reset your Arris SBG7600AC2 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. Every time your router loses power it reboots. However, when you reset a router you, return it back to its factory default settings.
Warning: This is not a step to be taken lightly. The following settings in your router will be changed:
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Arris SBG7600AC2 Guides
This is the reset router guide for the Arris SBG7600AC2. We also have the following guides for the same router:
Recover Password in Arris SBG7600AC2
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Arris SBG7600AC2
You can usually find a small reset button on either the back or the bottom of a router. Look at your router and try to find something that looks like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.
Remember, this will erase everything you have previously done to this Arris SBG7600AC2 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Arris SBG7600AC2
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can follow the SBG7600AC2 Login Guide to find everything that you need to log in.
Change Your Password
You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Arris SBG7600AC2 Guides
We have collected a lot of information about the Arris SBG7600AC2 router. You can find some of our additional content here.
This is the reset router guide for the Arris SBG7600AC2. We also have the following guides for the same router: