In this article, you will learn how to reset your Arris SBG8300 back to factory settings. This is not the same thing as rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's username and password are reset.
- Your WiFi name and password are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Arris SBG8300 Guides
This is the reset router guide for the Arris SBG8300 AR01.02.078.04_092820_711.NCS.10. We also have the following guides for the same router:
- Arris SBG8300 AR01.01.137_031319_701.NCS.10 - Login to the Arris SBG8300
- Arris SBG8300 AR01.01.137_031319_701.NCS.10 - Reset the Arris SBG8300
- Arris SBG8300 AR01.01.137_031319_701.NCS.10 - Arris SBG8300 Screenshots
- Arris SBG8300 AR01.01.137_031319_701.NCS.10 - Information About the Arris SBG8300 Router
Recover Password in Arris SBG8300
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Arris SBG8300
There is usually a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Just don't forget that this will totally reset your Arris SBG8300 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Arris SBG8300
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our SBG8300 Login Guide.
Change Your Password
Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Arris SBG8300 Guides
If you want additional help with your Arris SBG8300 be sure to check out some of our other guides.
This is the reset router guide for the Arris SBG8300 AR01.02.078.04_092820_711.NCS.10. We also have the following guides for the same router:
- Arris SBG8300 AR01.01.137_031319_701.NCS.10 - Login to the Arris SBG8300
- Arris SBG8300 AR01.01.137_031319_701.NCS.10 - Reset the Arris SBG8300
- Arris SBG8300 AR01.01.137_031319_701.NCS.10 - Arris SBG8300 Screenshots
- Arris SBG8300 AR01.01.137_031319_701.NCS.10 - Information About the Arris SBG8300 Router