If you need to reset your Arris SBR-AC3200P router back to factory settings, then this article shows you how. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's login credentials are reset.
- All WiFi settings are reset, including network name and password.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Arris SBR-AC3200P Guides
This is the reset router guide for the Arris SBR-AC3200P. We also have the following guides for the same router:
Recover Password in Arris SBR-AC3200P
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Arris SBR-AC3200P
Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:
Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Don't forget, this step will totally reset your Arris SBR-AC3200P router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Arris SBR-AC3200P
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our SBR-AC3200P Login Guide.
Change Your Password
You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Arris SBR-AC3200P Guides
If you want additional help with your Arris SBR-AC3200P be sure to check out some of our other guides.
This is the reset router guide for the Arris SBR-AC3200P. We also have the following guides for the same router: