This is the reset guide for the Arris TG1662G router. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login credentials are reset.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Arris TG1662G Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the Arris TG1662G 9.01.103UA. We also have the following guides for the same router:
Recover Password in Arris TG1662G
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Arris TG1662G
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Most routers have a small button on either the back or the bottom. What you are looking for is something that looks like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Keep in mind that this will completely reset your Arris TG1662G router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Arris TG1662G
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our TG1662G Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Arris TG1662G Guides
If you want additional help with your Arris TG1662G be sure to check out some of our other guides.
This is the reset router guide for the Arris TG1662G 9.01.103UA. We also have the following guides for the same router: