This article covers how to reset the Arris TG3492LG-LC router back to factory default settings. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Arris TG3492LG-LC Guides
This is the reset router guide for the Arris TG3492LG-LC AR01.04.055.06.08 UPC. We also have the following guides for the same router:
Recover Password in Arris TG3492LG-LC
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Arris TG3492LG-LC
You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Arris TG3492LG-LC router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Arris TG3492LG-LC
Now you need to log in using the factory default username and password. You can follow the TG3492LG-LC Login Guide to find everything that you need to log in.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Arris TG3492LG-LC Guides
We have collected a lot of information about the Arris TG3492LG-LC router. You can find some of our additional content here.
This is the reset router guide for the Arris TG3492LG-LC AR01.04.055.06.08 UPC. We also have the following guides for the same router: