This is the reset guide for the Arris TG3492LG-YL router. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- Your WiFi name and password are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Arris TG3492LG-YL Guides
This is the reset router guide for the Arris TG3492LG-YL AR01.04.055.06.07 Yallo. We also have the following guides for the same router:
Recover Password in Arris TG3492LG-YL
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Arris TG3492LG-YL
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Just don't forget that this will totally reset your Arris TG3492LG-YL router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Arris TG3492LG-YL
Now you need to log in using the factory default username and password. We have a TG3492LG-YL Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Arris TG3492LG-YL Guides
If you want additional help with your Arris TG3492LG-YL be sure to check out some of our other guides.
This is the reset router guide for the Arris TG3492LG-YL AR01.04.055.06.07 Yallo. We also have the following guides for the same router: