This guide shows you how to reset your Askey RTF3507VW-N2 router to factory default settings. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's username and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Askey RTF3507VW-N2 Guides
This is the reset router guide for the Askey RTF3507VW-N2 BR_SV_g000_R3507VWN1001_s32_1 Vivo. We also have the following guides for the same router:
Recover Password in Askey RTF3507VW-N2
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Askey RTF3507VW-N2
Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Keep in mind that this will completely reset your Askey RTF3507VW-N2 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Askey RTF3507VW-N2
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our RTF3507VW-N2 Login Guide.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Askey RTF3507VW-N2 Guides
This isn't our only Askey RTF3507VW-N2 guide. We also have the following guides for this router.
This is the reset router guide for the Askey RTF3507VW-N2 BR_SV_g000_R3507VWN1001_s32_1 Vivo. We also have the following guides for the same router: