This guide shows you how to reset your AZ-Technology WR744WSGV-V3 router. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.
Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:
- The router's username and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other AZ-Technology WR744WSGV-V3 Guides
This is the reset router guide for the AZ-Technology WR744WSGV-V3 3.0.4. We also have the following guides for the same router:
Recover Password in AZ-Technology WR744WSGV-V3
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the AZ-Technology WR744WSGV-V3
On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Keep in mind that this will completely reset your AZ-Technology WR744WSGV-V3 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the AZ-Technology WR744WSGV-V3
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our WR744WSGV-V3 Login Guide.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other AZ-Technology WR744WSGV-V3 Guides
This isn't our only AZ-Technology WR744WSGV-V3 guide. We also have the following guides for this router.
This is the reset router guide for the AZ-Technology WR744WSGV-V3 3.0.4. We also have the following guides for the same router: