In this guide I will show you how to reset the Bandluxe R508 router. There is a lot of confusion between the terms of reset and reboot. To reboot a router you cycle the power by turning it off and back on again. When you need to reset the router it takes all the settings and reverts them back to factory settings.
Warning: Resetting this router can cause problems if you are unaware of the changes a reset causes. We suggest making a list of settings you know will change. Consider the following:
- The router's main username and password are returned to factory settings.
- The WiFi settings are returned to factory settings. This will include the SSID, password, and security method.
- If you use a DSL router you need to re-enter the ISP username and password. If you are unsure of the details you need to call your ISP.
- All other settings are erased. This could include port forwards, IP address changes, or even parental changes.
Other Bandluxe R508 Guides
This is the reset router guide for the Bandluxe R508. We also have the following guides for the same router:
Reset the Bandluxe R508
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
The first thing you need to do is make sure the Bandluxe R508 router remains on during the reset process. Do not unplug or turn off the router during the reset as this could cause permanent damage to your Bandluxe R508 router.
The next step is to locate the tiny reset button. This is typically found on the back panel of the device. We have found this for you and circled it in the image below.
Take a sharpened pencil or pen to press and hold the reset button for about 10 seconds.
Remember this erases every setting you have ever made to this router. Be careful and try other troubleshooting methods first.
Login to the Bandluxe R508
Once you have finished resetting the Bandluxe R508 router you need to login using the appropriate default IP address, username, and password. We have found these for you and included them in our Bandluxe R508 Login Guide.
Change Your Password
Now we strongly recommend you change your default password. It is never a good idea to leave a password as it's default. Change this password to something you create. If you need help coming up with a good password check out our Choosing a Strong Password guide.
Tip: Go ahead and write this password down and stick it in a safe place. If you know you will lose it, it's okay to tape this particular password to the bottom of your router for future reference.
Setup WiFi on the Bandluxe R508
The last thing we will discuss in this guide are the WiFi settings. These have been reset as well. You need to change your SSID, password, and security method. We strongly recommend the use of WPA2-PSK for the most secure network security. For step-by-step instructions check out our How to Setup WiFi on the Bandluxe R508 guide.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Bandluxe R508 Help
Be sure to check out our other Bandluxe R508 info that you might be interested in.
This is the reset router guide for the Bandluxe R508. We also have the following guides for the same router: