If you need to reset your Baudtec RN104R5GCH2-A0 router back to factory settings, then this article shows you how. A router reset is very different than a router reboot. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Baudtec RN104R5GCH2-A0 Guides
This is the reset router guide for the Baudtec RN104R5GCH2-A0 PLDT. We also have the following guides for the same router:
Recover Password in Baudtec RN104R5GCH2-A0
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Baudtec RN104R5GCH2-A0
Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. It is harmless to hold the reset button too long.
Keep in mind that this will completely reset your Baudtec RN104R5GCH2-A0 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Baudtec RN104R5GCH2-A0
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our RN104R5GCH2-A0 Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Baudtec RN104R5GCH2-A0 Guides
We have collected a lot of information about the Baudtec RN104R5GCH2-A0 router. You can find some of our additional content here.
This is the reset router guide for the Baudtec RN104R5GCH2-A0 PLDT. We also have the following guides for the same router: