This page shows how to change the LAN IP Address on the Baudtec RN243R4 PLDT router.
Other Baudtec RN243R4 PLDT Guides
This is the ip address guide for the Baudtec RN243R4 PLDT. We also have the following guides for the same router:
- Baudtec RN243R4 PLDT - Baudtec RN243R4 PLDT Login Instructions
- Baudtec RN243R4 PLDT - How to change the DNS settings on a Baudtec RN243R4 PLDT router
- Baudtec RN243R4 PLDT - Baudtec RN243R4 PLDT Screenshots
- Baudtec RN243R4 PLDT - Information About the Baudtec RN243R4 PLDT Router
- Baudtec RN243R4 PLDT - Reset the Baudtec RN243R4 PLDT
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Baudtec RN243R4 PLDT
To get started configuring the Baudtec RN243R4 PLDT LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Baudtec RN243R4 PLDT, follow our Baudtec RN243R4 PLDT Login Guide.
Change the LAN IP Address on a Baudtec RN243R4 PLDT
If you followed our login guide above then you should see this screen.
This router IP address guide begins on the Status page of the BaudTec RN243R4 PLDT. Click the link at the top of the page labeled Setup. Then in the left sidebar click LAN.
Configure the LAN section of your Baudtec RN243R4 PLDT
This should take you to the LAN Interface Setup page. Use the box labeled IP Address to enter the new router IP address you want to use. We recommend ending this address in a one for easier recall.
No other changes should be made on this page, simply click the Apply Changes button before you exit.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Baudtec RN243R4 PLDT Info
Don't forget about our other Baudtec RN243R4 PLDT info that you might be interested in.
This is the ip address guide for the Baudtec RN243R4 PLDT. We also have the following guides for the same router:
- Baudtec RN243R4 PLDT - Baudtec RN243R4 PLDT Login Instructions
- Baudtec RN243R4 PLDT - How to change the DNS settings on a Baudtec RN243R4 PLDT router
- Baudtec RN243R4 PLDT - Baudtec RN243R4 PLDT Screenshots
- Baudtec RN243R4 PLDT - Information About the Baudtec RN243R4 PLDT Router
- Baudtec RN243R4 PLDT - Reset the Baudtec RN243R4 PLDT