How to change the IP Address on a BEC Technologies 7402GTMR4-SCED router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the BEC Technologies 7402GTMR4-SCED router.

Other BEC Technologies 7402GTMR4-SCED Guides

This is the ip address guide for the BEC Technologies 7402GTMR4-SCED.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The BEC Technologies 7402GTMR4-SCED

To get started configuring the BEC Technologies 7402GTMR4-SCED LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the BEC Technologies 7402GTMR4-SCED, follow our BEC Technologies 7402GTMR4-SCED Login Guide.

Change the LAN IP Address on a BEC Technologies 7402GTMR4-SCED

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your BEC Technologies router.

Once you have logged into the BEC Technologies 7402GTMR4-SCED you begin on the Status page. Click the blue tab on the left of the screen labeled Configuration then the white tab labeled LAN. Underneath of this, more choices will appear, choose Ethernet, it is the second one under LAN.

Configure the LAN section of your BEC Technologies 7402GTMR4-SCED

router setup
This is the setup page from your BEC Technologies router.

On this new page click the box labeled IP Address and enter the address you have chosen for your BEC Technologies 7402GTMR4-SCED.

We would like to recommend using the address of 192.168.1.1

Please make sure to leave the Subnet Mask at 255.255.255.0, then Apply your changes.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other BEC Technologies 7402GTMR4-SCED Info

Don't forget about our other BEC Technologies 7402GTMR4-SCED info that you might be interested in.

This is the ip address guide for the BEC Technologies 7402GTMR4-SCED.We also have the following guides for the same router: