Reset the BEC Technologies BEC 8920NE

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your BEC Technologies BEC 8920NE router. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. The following settings in your router will be changed:

  • The router's login credentials are reset.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other BEC Technologies BEC 8920NE Guides

This is the reset router guide for the BEC Technologies BEC 8920NE. We also have the following guides for the same router:

Recover Password in BEC Technologies BEC 8920NE

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the BEC Technologies BEC 8920NE

You can usually find a small reset button on either the back or the bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not worry about holding the button down too long; this is harmless.

Remember, this will totally reset your BEC Technologies BEC 8920NE router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the BEC Technologies BEC 8920NE

Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a BEC 8920NE Login Guide with all this information ready for you.

Change Your Password

Do not forget to change your router's default password when you log back into it. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other BEC Technologies BEC 8920NE Guides

We have collected a lot of information about the BEC Technologies BEC 8920NE router. You can find some of our additional content here.

This is the reset router guide for the BEC Technologies BEC 8920NE. We also have the following guides for the same router: