Setup Router logo in white Setup router name logo in white
Get Software

Reset the Bell Home Hub 2000

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This article covers how to reset the Bell Home Hub 2000 router back to factory default settings. This is not the same thing as rebooting a router. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Bell Home Hub 2000 Guides

This is the reset router guide for the Bell Home Hub 2000 SG981310034. We also have the following guides for the same router:

Recover Password in Bell Home Hub 2000

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Bell Home Hub 2000

Usually there is a reset button located on the back or bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will totally reset your Bell Home Hub 2000 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Bell Home Hub 2000

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a Home Hub 2000 Login Guide with all this information ready for you.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Bell Home Hub 2000 Guides

This isn't our only Bell Home Hub 2000 guide. We also have the following guides for this router.

This is the reset router guide for the Bell Home Hub 2000 SG981310034. We also have the following guides for the same router: