How to change the IP Address on a Cisco EA2700 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Cisco EA2700 router.

Other Cisco EA2700 Guides

This is the ip address guide for the Cisco EA2700.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Cisco EA2700

To get started configuring the Cisco EA2700 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Cisco EA2700, follow our Cisco EA2700 Login Guide.

Change the LAN IP Address on a Cisco EA2700

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Cisco router.

After you have successfully logged into the Cisco EA2700 you see the Setup page. This is the correct page to change your IP Address. If you are not on this page, simply click Setup at the top of the page, then Basic Setup.

Configure the LAN section of your Cisco EA2700

router setup
This is the setup page from your Cisco router.

To change your IP Address, the address you can see from inside your network, find the box labeled IP Address and enter the new address here. In this screenshot, someone has used 192.168.1.1, this is a good choice.

Leave the Subnet Mask alone at 255.255.255.0

You also want to leave the DHCP Server enabled.

Don't forget to save your changes.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Cisco EA2700 Info

Don't forget about our other Cisco EA2700 info that you might be interested in.

This is the ip address guide for the Cisco EA2700.We also have the following guides for the same router: