If you need to reset your CNS Link CNR-L200 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's login and password are reset.
- Your WiFi name and password are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other CNS Link CNR-L200 Guides
This is the reset router guide for the CNS Link CNR-L200. We also have the following guides for the same router:
Recover Password in CNS Link CNR-L200
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the CNS Link CNR-L200
There is usually a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will erase everything you have previously done to this CNS Link CNR-L200 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the CNS Link CNR-L200
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our CNR-L200 Login Guide to find all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other CNS Link CNR-L200 Guides
This isn't our only CNS Link CNR-L200 guide. We also have the following guides for this router.
This is the reset router guide for the CNS Link CNR-L200. We also have the following guides for the same router: