Reset the Compal CH7465LG-LC

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Compal CH7465LG-LC router back to factory default settings. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:

  • The router's username and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Compal CH7465LG-LC Guides

This is the reset router guide for the Compal CH7465LG-LC 6.12.18.25-2p6-NOSH Unitymedia. We also have the following guides for the same router:

Recover Password in Compal CH7465LG-LC

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Compal CH7465LG-LC

Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will erase everything you have previously done to this Compal CH7465LG-LC router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Compal CH7465LG-LC

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our CH7465LG-LC Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Compal CH7465LG-LC Guides

This isn't our only Compal CH7465LG-LC guide. We also have the following guides for this router.

This is the reset router guide for the Compal CH7465LG-LC 6.12.18.25-2p6-NOSH Unitymedia. We also have the following guides for the same router: